Configuration API for PubNub Mbed SDK

mbed complete API reference for building real-time applications on PubNub, including basic usage and sample code.

Configuration​

This documents the preprocessor definitions (macros) which are configuration options of C-core, which are kept in the pubnub_config.h header file. This header file is different for each platform. For some platforms, the definitions that "don't make sense" may be omitted from the header file.

Any definitions that you may find in pubnub_config.h, that are not listed here, should not be changed by the user.

PUBNUB_CTX_MAX: Maximum number of contexts​

Maximum number of PubNub contexts that can be used at the same time. It is used only if the contexts are statically allocated. The default on hosted platforms (POSIX, Windows...) is to use dynamically allocated contexts, so this is ignored. This is selected by linking in the "context allocation module" that you wish to use (static or dynamic).

A context is used to publish messages or subscribe to (get) them.

Each context can consume (for our purposes) a significant amount of memory, so don't put some number that is never going to be achieved here.

A typical configuration may consist of a single PubNub context for channel subscription and another PubNub context that will periodically publish messages about device status (with timeout lower than message generation frequency). This only needs two contexts.

Another typical setup may have a single subscription context and maintain a pool of contexts for each publish call triggered by an external event, like a button push. This would need N+1 contexts, N being the number of external events.

Of course, there is nothing wrong with having just one context, but you can't publish and subscribe at the same time on the same context. This isn't as bad as it sounds, but may be a source of headaches (lost messages, etc).

PUBNUB_BUF_MAXLEN: size of HTTP buffer​

Size, in octets, of the HTTP buffer. This is a major component of the memory size of the whole Pubnub context, but it is also an upper bound on URL-encoded form of published message, so if you need to construct big messages, you may need to raise this. So, if you need to publish only messages of up to 2Kb size, you don't need more than, say 2500 PUBNUB_BUF_MAXLEN. But, if you need to publish messages larger than 2Kb size, you would need a bigger buffer.

It is designed to be "settable" from the compiler options, with the value in the header being the default. But, it's perfectly fine to not set it in the compiler options but change its ("default") value in here.

PUBNUB_DYNAMIC_REPLY_BUFFER: use dynamic reply buffer​

Set to false (0) to use a static buffer and then set its size via PUBNUB_REPLY_MAXLEN. Set to true (anything !=0) to use a dynamic buffer, that is, dynamically try to allocate as much memory as needed for the buffer.

Default on hosted platforms (Windows, POSIX...) is to use dynamic reply buffer. But, be warned, this can be a lot of data, megabytes, even. If you don't really have that much memory to spare, you may be better of with the static reply butt. OTOH, if the reply is too long for your statically allocated buffer, your transaction will, effectively, fail. So, this is a trade-off that is specific to your application.

PUBNUB_REPLY_MAXLEN: reply static length​

This is only significant if PUBNUB_DYNAMIC_REPLY_BUFFER is true. In that case it defines the size, in octets, of the reply buffer. It will hold the whole (HTTP) body of the reply, not the (HTTP) headers.

Replies of API calls longer than this will be discarded and an error will be reported. Specifically, this may cause lost messages returned by subscribe if too many too large messages got queued on the PubNub server.

PUBNUB_ORIGIN: the DNS hostname of Pubnub​

This is the string of the DNS hostname of the PubNub network. In general, you should not change this. Also, if thus configured (see PUBNUB_ORIGIN_SETTABLE), you can change the origin at runtime.

But, in the case that you do need to change it at compile time, but not at runtime and want to save some RAM in the context, it's OK to change this macro.

PUBNUB_ORIGIN_SETTABLE: is origin settable at runtime​

If true (!=0), user will be able to change the origin at runtime. This incurs a small "memory penalty", of keeping the runtime origin in the context. This is the default, as the "penalty" is small.

If false (==0), user will not be able to change the origin at runtime. Use this if you need to squeeze the RAM memory footprint of C-core.

PUBNUB_DEFAULT_TRANSACTION_TIMER: duration of transaction timeout​

Duration of the transaction timeout set during context initialization, in milliseconds. Timeout duration in the context can be changed by the user after initialization (at runtime).

This is only used if timers support is used, which is the default on hosted platforms (POSIX, Windows...).

PUBNUB_CALLBACK_THREAD_STACK_SIZE_KB: size of the PubNub thread​

The size of the stack (in kilobytes) for the "polling" thread, when using the callback interface. We don't need much, so, if you want to conserve memory, you can try small values. It's hard to say what is the minimum, as it depends on the OS functions we call, but, you probably shouldn't try less than 64 KB.

Set to 0 to use the default stack size.

This is ignored when using the sync interface.

PUBNUB_PROXY_API: enable proxy support​

Set to true (!=0) to enable the proxy support. This is the default on hosted platforms (Windows, POSIX...). To actually use your proxy, you need to set proxy parameters (host, port, protocol....) with the appropriate C-core APIs.

Set to false (==0) to disable the proxy support. This can provide for significant code savings, which may be important if you wish the cut down the code/flash footprint.

Keep in mind that, depending on how you build C-core, this may not be enough. That is, you might also need to not compile and link the proxy modules. This is illustrated in the sample makefiles.

PUBNUB_MAX_PROXY_HOSTNAME_LENGTH: max length of proxy hostname​

The maximum length (in characters) of the host name of the proxy that will be saved in the PubNub context. Set this according to your proxy (or your "possible future proxies"). It's one "proxy hostname" per context, so, don't put kilobytes here "just in case", unless you know you can spare RAM.

PUBNUB_ONLY_PUBSUB: use only publish&subscribe​

Set to true (!=0) to use only the Publish and Subscribe transactions. Set to false to use all the available Pubnub transactions - this is the default on hosted (POSIX, Windows...) platforms.

This can provide for significant code size savings, if you don't need anything more than publish and subscribes, which may be important if you wish the cut down the code/flash footprint.

Keep in mind that this is not "fully self contained". If you try to compile modules that are not needed when PUBNUB_ONLY_PUBSUB is true, you'll get a warning. If you actually link them, you will only save the code memory if your linker discards modules that are not used - in general, that is what linkers do, but it depends on your linker and the options you pass to it.

This is designed to be set via compiler options, with the value in the header file being the default. But, there is nothing wrong with setting it in the header itself.

Initialization​

You can make your own program, or start by importing the sample program

The sample is for AT&T IoT Starter Kit, which uses the Freescale (now NXP) K64F and WNC modem, so if you use some other HW you would need to change the library/driver you use for networking, but, as far as Pubnub API is concerned, the sample is usable on other HW.

If you want to make your own program from scratch, then:

  1. Import the Pubnub library For now, there is only the sync library.

  2. If your MBed project/program doesn't already use it, import the network library. The sample uses the WNC modem library. The latest revision at the time of this writing has build issues, but we don't need it, so use the revision from the URL.

  3. Add a pubnub_config.h to your program. You can copy the contents from the sample program and then tinker with it, if you wish. All the knobs are documented, so here we'll look at only the where to log configuration, near the end of pubnub_config.h:

    #include <MODSERIAL.h>
    extern MODSERIAL pc;
    #define PUBNUB_LOG_PRINTF(...) pc.printf(__VA_ARGS__)

    This expects that in your program somewhere you define the MODSERIAL pc global object. In the sample program, it's defined in main.cpp:

    MODSERIAL pc(USBTX,USBRX,256,256);

    Of course, you can #define PUBNUB_LOG_PRINTF(...) to whatever you wish to use for Pubnub logging.

  4. If your MBed project/program doesn't already use/initialze it, initialize the networking library. The sample does this by defining an object of class WNCInterface and then calls its init and connect member functions.

    WNCInterface eth;
    int main() {
        // .... some other init code, like serial port (`pc`)
        pc.printf("init() returned 0x%04X" CRLF, eth.init(NULL,&pc));
        eth.connect();
        pc.printf("IP Address: %s" CRLF, eth.getIPAddress());
        // now modem init is done, you can use Pubnub C-core APIs
    }

  5. After the modem has be initialized, you can use the PubNub C-core APIs like on any other supported platform.

Including the header​

The calling pattern you choose to use with PubNub (Synchronous vs Callback) will determine which header to import. More information on these calling patterns can be found later on in this guide.

At this time, only the sync pattern is supported on MBed.

Sync​

If using the synchronous (sync) pattern, import only pubnub_sync.h:

#include "pubnub_sync.h"

Memory allocation​

This client uses dynamic memory allocation for the PubNub contexts, but the usage is the same as for any other Pubnub C client - always use pubnub_alloc() to create a context (and check its return value) and always use pubnub_free() to dispose of a context.

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

#include "pubnub_alloc.h"

int main() {
    pubnub_t *ctx = pubnub_alloc();
    if (NULL == ctx) {
        return -1;
    }
    /* Do something with ctx...
        and then: */
    pubnub_free(ctx);
    return 0
}

Timers​

We only provide one timer - the (total) transaction timer. In general, it is started when a transaction is started and stopped when a transaction is finished. If it expires, the transaction will be cancelled. Keep in mind that this canceling is local, so, for example, if you already published a message, but, for some reason, the HTTP response didn't arrive in time, this canceling will not revoke the publish - it will just stop the wait for response.

If the transaction timer expires, the outcome of the transaction will be timeout - different than when you cancel a transaction yourself.

The actual duration of the timer is at least as long as you set it. It could be significantly higher, depending on various platform issues. But, in general, it will be close to what you set.

You should set the timer after initializing the context and before starting a transaction. The duration you set will be used for all subsequent transactions, regardless of their type (that is, for publish and subscribe and all other).

Thread safety​

C-core supports thread-safe operation, though, for performance, you may think about not using it. To use thread-safety support, define the preprocessor symbol PUBNUB_THREADSAFE (just define it, the value does not matter). The recommended place to do it is in pubnub_config.h.

Thread-safe Usage​

Thread safety is internal. Just because you can access the PubNub context through the PubNub C-core SDK API from different threads safely, doesn't mean you're off the hook for your own data that is related to a context. For example, if you're using the callback interface and signalling an event from it to other (worker) thread(s), you have to synchronise that data transfer yourself.

If you compiled thread-safety support in, you are free to access the same context from different threads, pretty much in any way you wish. However, there are some advised guidelines you should follow:

  • If you're using the sync blocking interface, threads that come to wait on the context may wait a long time, so try to avoid it (also, re-think your whole need for a thread-safe C-core)
  • If you're using the sync non-blocking interface by calling pubnub_await, things are pretty much the same as for sync blocking interface
  • If you're using the sync non-blocking interface and avoid pubnub_await, waiting threads will not block so long, but, pretty much the only useful thing you can do is cancel a transaction from another thread.
  • Using the sync interface, it's perfectly fine to call pubnub_await or pubnub_last_result in different threads, but, you probably shouldn't do that, as it will make debugging harder.
  • If you're using the callback interface, it's perfectly fine to call Functions from your callback, but, you should avoid doing that, except for some helper functions. Following this guideline will make your debugging, thus life, a lot easier
Thread-unsafe usage​

If you compile without thread-safety support, obviously, you will have an SDK which is not thread safe - that is, it is not safe to use a single context from more than one thread at the same time. So, if you're using such SDK configuration in a multithreaded code, then:

  1. If at all possible, use a single context from only one thread - the one that created it.
  2. If 1. is not possible, provide some synchronization yourself, for example, using pthread condition variables, or just mutexes, or some higher abstraction, like message queues.
  3. As a special case, if you're using the callback interface, you can start a transaction in one thread and then don't touch the context from that thread any more - use it only in the callback. This is safe.
Context usage

Keep in mind that it is perfectly safe to use different contexts from different threads at the same time. To each (thread) its own (context).

Transaction and operation​

The MBed C SDK operates as a set of transactions. A transaction is initiated by the client SDK and is defined as a single message exchange between the SDK and PubNub service. Every interaction that the client SDK initiates with PubNub is sequenced as a series of transactions which ultimately results in a PubNub service-specific operation.

Status and events​

The SDK provides a set of status and event identifiers which can help developers interact with the library. The status identifier codes are returned as part of the SDK's API invocation. These are used by the developer to check for status of transactions or for detecting normal / abnormal conditions in an API call. Some of the commonly used status codes are as follows

  1. PNR_OK: Success, the transaction finished successfully.
  2. PNR_STARTED: The previously initiated transaction has started.
  3. PNR_IN_PROGRESS: Indicates that the previous transaction with PubNub service is still in progress.

Refer to the API docs for a complete list of status identifiers supported by the library.

Events refer to the PubNub REST operations which are initiated by the client SDK. The most common example of events are subscribe and publish. A client subscribing for a channel is a subscribe event and a client publishing a message on a channel is a publish event.

Some of the common event identifiers are as follows:

  1. PBTT_SUBSCRIBE: Subscriber operation
  2. PBTT_PUBLISH: Publish operation

Refer to the API docs for a complete list of operations supported by the SDK.

CALLING PATTERNS​

This SDK provides sync interface for retrieving the outcome of a Pubnub request/transaction/operation. The callback (notification) will be provided later.

Sync​

The sync interface works like this:

  1. Start a transaction (say, publish - using pubnub_publish()).
  2. Either pubnub_await() the outcome, or use your own loop in which you check if (PNR_STARTED != pubnub_last_result()).
  3. Handle the outcome as you wish.

This is illustrated in the Hello World example below (which is the same for any platform that supports sync interface).

Description​

This function is used for initializing the PubNub Client API context. This function must be called before attempting to utilize any API functionality in order to establish account level credentials such as publish_key and subscribe_key.

Method(s)​

To Initialize PubNub you can use the following method(s) in the mbed SDK:

void pubnub_init (pubnub_t *p, const char *publish_key, const char *subscribe_key)
ParameterTypeRequiredDescription
ppubnub_t*YesPointer to the Context to initialize (use pubnub_alloc() to obtain it)
publish_keychar *YesPointer to the string of the key to use when publishing messages.
subscribe_keychar *YesPointer to the string of the key to use when subscribing to messages

Basic Usage​

Initialize the PubNub client API​

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_t *ctx = pubnub_alloc();
if (NULL == ctx) {
    puts("Couldn't allocate a Pubnub context");
    return -1;
}
pubnub_init(ctx, "demo", "demo");
pubnub_set_uuid(ctx, "myUniqueUUID");
pubnub_set_ssl_options(ctx, true, true, true);

Returns​

It returns the PubNub instance for invoking PubNub APIs like pubnub_publish(), pubnub_subscribe(), pubnub_history(), pubnub_here_now(), etc.

Other Examples​

Initialize the client​

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_init(
    ctx,
    /*publish key*/"demo",
    /*subscribe key*/"demo"
);

Initialization for a Read-Only client​

In the case where a client will only read messages and never publish to a channel, you can simply omit the publish_key when initializing the client:

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_init(ctx, "", "demo");

Use a custom UUID​

Set a custom UUID to identify your users.

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_t *pn = pubnub_alloc();
pubnub_init(pn, "myPublishKey", "mySubscribeKey");
pubnub_set_uuid(pn, "myUniqueUUID");

Initializing with SSL Enabled​

This examples demonstrates how to enable PubNub Transport Layer Encryption with SSL. Just initialize the client with second set to true. The hard work is done, now the PubNub API takes care of the rest. Just subscribe and publish as usual and you are good to go.

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_t *ctx = pubnub_alloc();
if (NULL == ctx) {
    puts("Couldn't allocate a Pubnub context");
    return -1;
}
pubnub_init(ctx, "demo", "demo");
pubnub_set_uuid(ctx, "myUniqueUUID");
pubnub_set_ssl_options(ctx, true, true, true);

UUID​

These functions are used to set/get a user ID on the fly.

Method(s)​

To set/get UUID you can use the following method(s) in mbed SDK:

void pubnub_set_uuid (pubnub_t *p, const char *uuid)
ParameterTypeRequiredDescription
ppubnub_t*YesPointer to PubNub context
uuidconst char*YesPointer to uuid string
char const *pubnub_uuid_get(pubnub_t *p)
ParameterTypeRequiredDescription
ppubnub_t*YesPointer to pubnub client context.

After pubnub_init(), it will return NULL until you change it to non-NULL via pubnub_set_uuid().

Basic Usage​

Set UUID​

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_t *ctx = pubnub_alloc();
if (NULL == ctx) {
    puts("Couldn't allocate a Pubnub context");
    return -1;
}
pubnub_init(ctx, "myPublishKey", "mySubscribeKey");
pubnub_set_uuid(ctx, "myUniqueUUID");

Get UUID​

printf("UUID is %s", pubnub_uuid_get(ctx));

Returns​

Get UUID returns the following output:

TypeDescription
char const*UUID for context. Null if not set.

Other Examples​

Initializing with a custom uuid​

Required UUID

Always set the UUID to uniquely identify the user or device that connects to PubNub. This UUID should be persisted, and should remain unchanged for the lifetime of the user or the device. If you don't set the UUID, you won't be able to connect to PubNub.

pubnub_t *ctx = pubnub_alloc();
if (NULL == ctx) {
    puts("Couldn't allocate a Pubnub context");
    return -1;
}

struct Pubnub_UUID uuid;
char random_uuid;
if (0 == pubnub_generate_uuid_v4_random(&uuid)) {
    random_uuid = pubnub_uuid_to_string(&uuid).uuid;
    pubnub_init(ctx, "myPublishKey", "mySubscribeKey");
    pubnub_set_uuid(ctx, random_uuid);
}

pubnub_free(ctx);

Authentication Key​

Setter and getter for users auth key.

Method(s)​

pubnub_set_auth(pubnub_t* p, const char* auth)
ParameterTypeRequiredDescription
ppubnub_t*YesPointer to pubnub client context
authconst char*OptionalPointer to auth string. NULL to unset
char const *pubnub_auth_get(pubnub_t *p)
ParameterTypeRequiredDescription
ppubnub_t*YesPointer to pubnub client context

Basic Usage​

Set Auth Key​

pubnub_t *ctx = pubnub_alloc();
if (NULL == ctx) {
    puts("Couldn't allocate a Pubnub context");
    return -1;
}
pubnub_init(ctx, "demo", "demo");
pubnub_set_auth(ctx, "my_new_authkey");

Get Auth Key​

pubnub_t *ctx = pubnub_alloc();
if (NULL == ctx) {
    puts("Couldn't allocate a Pubnub context");
    return -1;
}
pubnub_init(ctx, "demo", "demo");
pubnub_set_auth(ctx, "my_auth_key");
printf("Auth Key is %s", pubnub_auth_get(ctx));

Returns​

Get Auth key returns the current authentication key.

Origin​

Sets the origin to be used for the context p. If setting of the origin is not enabled, this will fail. It may also fail if it detects an invalid origin, but NULL is not an invalid origin - it resets the origin to default.

Method​

To set the origin for a Pubnub context use:

int pubnub_origin_set(pubnub_t *p, char const *origin)
ParameterTypeRequiredDescription
ppubnub_t *YesPubnub context to set origin for
Originchar const*OptionalThe origin to use for context p. If NULL, the default origin will be set

Basic Usage​

To set the origin to the European data center explicitly:

pubnub_origin_set(pn, "ps.pndsn.com");

Returns​

TypeDescription
int0: success, -1: fail
Last updated on
On this page